Skip to content

snom 200 password recovery

If you forgot the admin password, you'll need to upload a new firmware to the phone in order to get default settings again.

I first downloaded snom200-3.56z-SIP.bin from http://www.snom.com/firmware.html to my tftp server.

then I created a symlink snom200.bin to snom200-3.56z-SIP.bin

now you need to power on the phone. while the initial text/logo is displayed, press any key. the phone now prompts you for an ip address and a tftp address. enter these, and press OK. the phone will now update it's firmware and boot. you then need to select the country, timezone etc. once this is done, you get a new firmware with factory defaults.

now just point your browser to the snoms' ip address. (while we are here we can check if the bootloader can be updated too)

update 2010-03-16: the firmware can now be downloaded from http://wiki.snom.com/Snom2xx/Firmware
  • Twitter
  • Bookmark snom 200 password recovery at del.icio.us
  • Facebook
  • Google Bookmarks
  • FriendFeed
  • Digg snom 200 password recovery
  • Mixx snom 200 password recovery
  • Bloglines snom 200 password recovery
  • Technorati snom 200 password recovery
  • Fark this: snom 200 password recovery
  • Bookmark snom 200 password recovery at YahooMyWeb
  • Bookmark snom 200 password recovery at Furl.net
  • Bookmark snom 200 password recovery at reddit.com
  • Bookmark snom 200 password recovery at blinklist.com
  • Bookmark snom 200 password recovery at Spurl.net
  • Bookmark snom 200 password recovery at NewsVine
  • Bookmark snom 200 password recovery at Simpy.com
  • Bookmark snom 200 password recovery at blogmarks
  • Bookmark snom 200 password recovery with wists
  • wong it!
  • Bookmark using any bookmark manager!
  • Stumble It!
  • Print this article!
  • E-mail this story to a friend!
  • Identi.ca

Trackbacks

No Trackbacks

Comments

Display comments as Linear | Threaded

Eric Kowalewski on :

Hello,

I have the same problem with a Snom 220. I can't get in because a password was set. I tried the above steps (using the appropriate versions) and it doesn't work. Any ideas for the 220's?

Thanks,
Eric

crox on :

If you get the firmware from http://wiki.snom.com/Snom2xx/Firmware and flash it with tftp it should work. Don't forget to rename (or symlink) the file to "snom220.bin".

Add Comment

Enclosing asterisks marks text as bold (*word*), underscore are made via _word_.
Standard emoticons like :-) and ;-) are converted to images.

To prevent automated Bots from commentspamming, please enter the string you see in the image below in the appropriate input box. Your comment will only be submitted if the strings match. Please ensure that your browser supports and accepts cookies, or your comment cannot be verified correctly.
CAPTCHA

Form options